The Dongguan trimming machine usually consists of a motor, a cutter head, and a protective cover with an adjustable angle.
The use of the trimming machine is that the edge of the wooden board can be shaped into a corresponding shape according to the shape of the cutter head, and is usually used as a right angle to round the rounded edge, and is also used as a suitable polishing operation for the wood. It is also widely used in the reinforcement of building beams, slabs, columns, walls, etc., decoration, wall installation, brackets, railings, billboards, air conditioner outdoor units, guide rails, satellite receiver elevators, steel structure plant installation. The O-ring trimming machine can save manpower and should be used when using:
1. Before use, check whether the parts are normal and pay attention to daily cultivation.
2, the use of the hand to correctly grasp, use the workpiece to move evenly, the speed should not be too fast. It should be operated according to the prior edge to avoid damage to the object.
3. After use, cut off the power and remove dust. For the use and maintenance of the woodworking trimming machine, you can continue to explore in practice, or refer to the product manual.
In addition to the above-mentioned Dongguan trimming machine, the fixed trimming machine is generally used for metal strip trimming, which is to remove or chamfer the burrs on both sides into the required curvature with a fixed cutter. The scope of the trimming machine: commonly used in tableware, stationery, hardware, sheet metal and other industry-specific equipment.
Main function: It is used for grinding and polishing of the tape with double side angle.
Applicable materials: metal coils such as stainless steel, copper strip and aluminum strip.
Advantages of the equipment: It has the characteristics of rough grinding, fine grinding and polishing once, and is suitable for grinding the inclined surface of metal strips of different sizes and thicknesses.